PRODUCTS                                       Cable Assembly - PC Cables
 
  
Serial ATA Cable (SATA) (90° to 90°)
Serial ATA Cable (SATA) (90° to 90°)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

When connecting serial ATA devices to your motherboard or host controller, you want a permanent solution. The last thing you need is a cable that could fatigue, or even fail over time, because of bending or stress occurring right at the critical connection. Our angled connectors deliver the cable at a more desired angle and
are fortified to keep the cable lined up straight. So you'll continue to receive the performance you expect from your serial ATA drive long after you've plugged it in. Vigortec offers a variety of serial ATA cables which minimize clutter, increase airflow and provide MAXIMUM transfer rates. Serial ATA cables by Cables To Go,
are designed to handle the differential signals implemented in today's technology. This ensures increased throughput and reduced data packet loss. The 7-pin, Serial ATA cables permit higher data transmission rates, reduce crosstalk, and improve signal integrity. And these cables reduce overheating and save internal space within the CPU unit for easy movement when adding or removing hard drives, PCI cards or other adapters.

Features:

• Connectors: Two 7-Pin Serial ATA Females; 90 degrees
   to 90 degrees
• Devices Supported: 1
• Cable Type: 90 Degree 7 Conductor
• Cable Length: 18 inches
• Angled connectors ensure more compact look and reduce
   potential fatigue or cable failure
• Supports transfer rates of up to 3Gb depending on the
   peripherals used
• standard length of cables 0.5M / 1.5M / 3.0M & 5.0M

 
 
DB25F/-25F
DB25/F-25/F
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

DB25 Female to Female cables are designed for RS-232 serial or parallel applications. Easily connect your printer, modem or other DB25 device to a switchbox. All 25 lines are wired straight through pin-to-pin for ease of compatibility. Each
cable is constructed with molded connectors and foil shielding for EMI/RFI protection.

Features:

• Connectors: DB25 Female to DB25 Female
• Connect your printer, modem or other DB25 serial/parallel
   devices to a switchbox
• Protection against EMI/RFI interference
• Fully molded connectors with thumbscrew provide you with
   a quick and easy connection every time
• All 25 lines wired straight through